Welded Metal Frame
Welded Metal Frame
Starting at: $191.00
Description
Welded Hollow Metal Door Frame for Commercial Applications
Three-sided flush frames are engineered to meet the demands of standard through maximum-duty use in commercial, industrial, and institutional settings. Suitable for both interior and exterior installations, these frames are compatible with virtually all building types and wall constructions. Anchors are included for installation in new or existing walls.
Features
- 16-gauge cold-rolled steel construction (galvanized option available)
- WGS assembled frame: squared, welded face corners, and ground smooth for a clean finish
- Includes welded-on spreader bars for shipping stability (must be removed before installation; attachment points may require touch-up)
- Pair frames available for double-door openings
- Universal hinge preparations allow easy field conversion from standard weight (.134″ thick) to heavyweight (.180″) hinges
- Hardware preparations and reinforcements comply with ANSI A250.8-2014 (SDI 100) standards
- Fire-rated up to 3 hours with WHI / ITS mylar label applied
| Construction |
Heavy Duty; 16-Gauge Cold Rolled Steel - meets the requirements of ANSI A250.8-2014 (SDI 100) |
|---|---|
| Handing |
Handed - LH/RHR, RH/LHR |
| Jamb Faces |
2-inch Jamb and Head Faces Standard (4" Heads and Custom Jamb Faces Available) |
| Parts |
2 Jambs, 1 Head - Assembled Frame; Squared, Welded Face Corners & Ground Smooth |
| Stop Height |
5/8” Stop Height |
| Rabbets |
Unequal Double Rabbets Standard |
| Corners |
Exact Fit Die-Mitered Corner Connections - Welded Face Corners, Ground Smooth and Primed |
| Hinge Reinforcements |
7-Gauge Hinge Reinforcements |
| Closer Reinforcement |
Optional 14-Gauge Door Closer Reinforcement |
| Strike Prep |
4-7/8” Universal ASA Strike Preparation (Blank Strike Jambs Available) |
| Silencer Preparation |
9/32” Silencer Preparation |
| Pair Head Preps |
Flush Bolt Strike, Silencer Preps, SVR Preps |
| Optional Preps |
Blank Hinge Jamb For Continuous Hinge, Deadbolt Strike, Electric Strike, Exit Device Strike Reinforcement |
| Existing Wall Anchors |
EWA-Existing Wall Butterfly Anchor Standard (Loose), Existing Wall Tube Anchor (Welded-in), Reversed Base Anchor |
| New Interior Stud Wall Anchors |
Combo Stud Anchor (Wood or Steel), Floor Base Anchor (Loose or Welded-in) |
| New Exterior Wall Anchors |
T Anchor, Wire Anchor, Floor Base Anchor (Loose or Welded-in) |
| Fire-Rating |
Optional – WHI / ITS up to 3-Hour Fire-Rating (Mylar Label) - Fire Rated Assemblies must be in accordance with NFPA 80 |
| Finish |
Factory-Applied, Baked-On Rust, Inhibiting Primer (No Special Color Options) – Not intended to be a finish coat. It is recommended that finish paint (top coat) be applied after installation |
| Buy American Act Compliance |
Meets Buy American Act – Made in USA |
| Mfg. Hinge/Lock Locations |
Steelcraft Locations Standard (Ceco, Curries, and Custom Locations Available) |
The anchors shown below are installed on the stud and/or floor prior to the drywall being hung.
Combo Stud Anchor (Wood or Steel)
Floor Base Anchor
T Anchor
Wire Anchor
