3-Piece Knocked Down Drywall Frame for Stud Walls – Commercial Hollow Metal Door Frame This knocked-down drywall frame is designed for interior stud walls and can be used with steel or wood doors. Suitable for light- to heavy-duty applications in commercial and institutional buildings, these frames are installed in rough openings after the wall has been constructed and finished. They are supplied with KD (knock-down) corners for fast and efficient installation. Features Constructed from 16-gauge cold-rolled steel Pair frames available for double-door openings Includes screw-adjusting compression anchors that tighten against the stud Sill attachment is made through the frame face directly into the wall sill runner, with factory countersunk holes for screw fastening Hardware preparations and reinforcements comply with ANSI A250.6 standards Recommended for interior applications only Fire-rated for up to 90 minutes with WHI / ITS mylar label applied

Read more less

KD – Knocked Down Masonry Hollow Metal Frame for Commercial Applications Three-sided flush frames are engineered to meet the demands of standard through maximum-duty use in commercial, industrial, and institutional settings. They can be installed in both interior and exterior locations and are compatible with virtually all building types and wall constructions. Anchors are included for installation in new or existing walls. Features 16-gauge cold-rolled steel construction (galvanized option available) Pair frames available for double-door openings Universal hinge preparations allow easy field conversion from standard weight (.134″ thick) to heavyweight (.180″) hinges Hardware preparations and reinforcements comply with ANSI A250.8-2014 (SDI 100) standards Fire-rated for up to 3 hours with WHI / ITS mylar label applied

Read more less

Welded Hollow Metal Door Frame for Commercial Applications Three-sided flush frames are engineered to meet the demands of standard through maximum-duty use in commercial, industrial, and institutional settings. Suitable for both interior and exterior installations, these frames are compatible with virtually all building types and wall constructions. Anchors are included for installation in new or existing walls. Features 16-gauge cold-rolled steel construction (galvanized option available) WGS assembled frame: squared, welded face corners, and ground smooth for a clean finish Includes welded-on spreader bars for shipping stability (must be removed before installation; attachment points may require touch-up) Pair frames available for double-door openings Universal hinge preparations allow easy field conversion from standard weight (.134″ thick) to heavyweight (.180″) hinges Hardware preparations and reinforcements comply with ANSI A250.8-2014 (SDI 100) standards Fire-rated up to 3 hours with WHI / ITS mylar label applied

Read more less

Flush Commercial Hollow Metal Frame – Traffic Door Frame Designed for double-acting doors (swinging in both directions), as well as sliding or bi-fold doors, this frame can also be used to finish a wall opening where no door is required. Features Constructed from 16-gauge cold-rolled steel Available in KD (knocked down) or welded configurations Can be reinforced for traffic door hardware Pair frames available for double traffic door setups Recommended for interior applications only

Read more less

Commercial Steel Window Frame – 4-Sided Hollow Metal Borrowed Lite This four-sided frame is designed without a door opening and is prepared for field installation of glass. Borrowed lite frames can be configured for a single pane or multiple glass sections. They may be installed within a wall above the floor or positioned on the floor to extend up to the ceiling. All borrowed lite frames include glazing beads (glass stops), which mount on the interior side to securely hold the glass in place. Features 16-gauge cold-rolled steel construction (galvanized option available) Includes 5/8″ glass stops, screws, and glazing tape Five glass type options available Anchors available for any wall condition Offered in KD (knocked down) or welded configurations Vertical or horizontal mullion options to divide into multiple sections Optional fire rating up to 45 minutes with WHI / ITS mylar label applied (limited sizes available)

Read more less

Steel Sidelite Door Frame for Commercial Applications Sidelite frames are door frames with glass openings attached to one or both sides of the door opening. The sidelight section may cover only part of the door height or extend the full height of the opening. The frame itself matches the door height; if the frame extends above the door height, it is classified as a transom sidelite frame. All sidelite frames include glazing beads (glass stops), which install on the interior side of the frame to secure the glass in place. Features 16-gauge cold-rolled steel construction (galvanized option available) Includes 5/8″ glass stops, screws, and glazing tape Five glass type options (optional steel panel available instead of glass) Anchors available for any wall condition Offered in KD (knocked down) or welded configurations Vertical or horizontal mullion options for dividing into multiple sections Optional fire rating up to 90 minutes with WHI / ITS mylar label applied (limited sizes available)

Read more less

Steel Door Frame with Transom for Commercial Applications Transoms are door frames that include a transom bar with a glass or steel panel positioned above the door opening. The transom bar separates the main door opening from the upper transom section. Frame height can vary but typically extends to the ceiling. All sidelite frames come with glazing beads (glass stops) that install on the interior side of the frame to secure the glass or panel. Transom frames may also be configured with attached sidelites. Features 16-gauge cold-rolled steel construction (galvanized option available) Includes 5/8″ glass stops, screws, and glazing tape Five glass type options (optional steel panel available in place of glass) Anchors available for any wall condition Offered in KD (knocked down) or welded configurations Optional fire rating up to 45 minutes with WHI / ITS mylar label applied (limited sizes available)

Read more less

Steel Double Egress Frame for Commercial Applications Premium steel frames designed for corridor installations in hospitals, schools, and nursing homes where controlled traffic flow is essential. Double egress frames are commonly used in cross-corridor openings to help manage both movement and smoke control. Features 16-gauge cold-rolled steel construction (galvanized option available) Anchors available to suit any wall condition Offered in KD (knocked down) or welded configurations Hardware preparations and reinforcements compliant with ANSI A250.8-2014 (SDI 100) standards Fire-rated for up to 3 hours with WHI / ITS mylar label applied

Read more less