KD Masonry Frame
KD Masonry Frame
Starting at: $160.00
Description
KD – Knocked Down Masonry Hollow Metal Frame for Commercial Applications
Three-sided flush frames are engineered to meet the demands of standard through maximum-duty use in commercial, industrial, and institutional settings. They can be installed in both interior and exterior locations and are compatible with virtually all building types and wall constructions. Anchors are included for installation in new or existing walls.
Features
- 16-gauge cold-rolled steel construction (galvanized option available)
- Pair frames available for double-door openings
- Universal hinge preparations allow easy field conversion from standard weight (.134″ thick) to heavyweight (.180″) hinges
- Hardware preparations and reinforcements comply with ANSI A250.8-2014 (SDI 100) standards
- Fire-rated for up to 3 hours with WHI / ITS mylar label applied
| Construction |
Heavy Duty; 16-Gauge Cold Rolled Steel - meets the requirements of ANSI A250.8-2014 (SDI 100) |
|---|---|
| Handing |
Handed - LH/RHR, RH/LHR |
| Jamb Faces |
2-inch Jamb and Head Faces Standard (4" Heads and Custom Jamb Faces Available) |
| Parts |
2 Jambs, 1 Head |
| Stop Height |
5/8” Stop Height |
| Rabbets |
Unequal Double Rabbets Standard |
| Corners |
Exact Fit Die-Mitered Corner Connections |
| Hinge Reinforcements |
7-Gauge Hinge Reinforcements |
| Closer Reinforcement |
Optional 14-Gauge Door Closer Reinforcement |
| Strike Prep |
4-7/8” Universal ASA Strike Preparation (Blank Strike Jambs Available) |
| Silencer Preparation |
9/32” Silencer Preparation |
| Pair Head Preps |
Flush Bolt Strike, Silencer Preps, SVR Preps |
| Optional Preps |
Blank Hinge Jamb For Continuous Hinge, Deadbolt Strike, Electric Strike, Exit Device Strike Reinforcement |
| Existing Wall Anchors |
EWA-Existing Wall Butterfly Anchor Standard (Loose), Existing Wall Tube Anchor (Welded-in), Reversed Base Anchor |
| New Wall Anchors |
T Anchor, Wire Anchor, Floor Base Anchor (Loose or Welded-in) |
| Fire-Rating |
Optional – WHI / ITS up to 3-Hour Fire-Rating (Mylar Label) - Fire-Rated Assemblies must be in accordance with NFPA 80 |
| Finish |
Factory-Applied, Baked-On, Rust Inhibiting Primer (No Special Color Options) – Not intended to be a finish coat. It is recommended that finish paint (top coat) be applied after installation |
| Buy American Act Compliance |
Meets Buy American Act – Made in USA |
| Mfg. Hinge/Lock Locations |
Steelcraft Locations Standard (Ceco, Curries, and Custom Locations Available) |
T Anchor
Wire Anchor
