Flush Commercial Hollow Metal Doors
Flush Commercial Hollow Metal Doors
Starting at: $327.00
Description
Heavy-Duty Steel Doors for Commercial, Industrial, and Institutional Use
Our stock hollow metal doors provide a cost-effective, non-handed solution with a clean, full-flush steel design. Engineered to meet demanding standards for durability, security, appearance, and fire protection, these doors are ideal for both replacement projects and new frame installations.
Features:
- 1-3/4” thick, non-handed construction with reversible hinge plates
- Inverted top and bottom channels for enhanced strength and protection
- Interlocking seams for superior structural rigidity and long-term durability
- Compatible with a wide variety of vision glass lites, louvers, and hardware preparations
- Factory-applied rust-inhibiting primer (standard finish; no custom color options)
| Level |
Heavy Duty, SDI Level 2 – 18-Gauge Steel Face Sheets – (16 Ga. Available) |
|---|---|
| Core |
Rigid Honeycomb Core or Polystyrene Core |
| Door Thickness |
1-3/4" Standard |
| Handing |
Non-Handed Design; Reversible Hinge Plates |
| Sizes |
Standard Widths up to 4'0", Heights to 8'0" (Custom Sizes Available) |
| Edges |
Square Hinge and Lock Edges (Beveled Edges Available) – Full Height, Epoxy Filled Mechanical Interlock Edges |
| Reinforcements |
Heavy Gauge Door Closer and Hinge Reinforcements |
| Channels |
14-Gauge Inverted Top and Bottom Channels, Optional Flush Top Cap |
| Door Finish |
Factory-Applied, Baked-On, Rust Inhibiting Gray Primer (No Special Color Options) – Not intended to be a finish coat. It is recommended that finish paint (topcoat) be applied after installation |
| Standard Preps |
161 (cylindrical lock), 86 Edge (mortise lock), Deadbolt, RPD (blank edge, panic reinforced) |
| Optional Preps |
Continuous Hinge Application (Undersized Width), Exit Device Trim, Deadbolts, Lite and Louver Cutouts |
| ANSI Standards |
Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8 |
| Fire-Rating |
Optional – WHI / ITS up to 3-hour Fire-Rating, Positive Pressure and “S” Smoke included |
| Approvals |
Optional – Florida Product Approved FL-13884 or FL-14237 |
| Buy American Act Compliance |
Meets Buy American Act – Made in USA |
| Mfg. Hinge/Lock Locations |
Steelcraft, Baron, Ceco, Curries, Mesker, Republic, Pioneer, Deansteel, Custom Locations |
Non-Handed Hinge Reinforcement (Reversible Plate)
161 Lock Prep / Deadbolt Prep (Bored – 2-3/4″ Backset) ANSI / SDI A115.2
86 Edge Prep (Mortise Lock) ANSI / SDI A115.1
RPD – Rim Panic Reinforced (Blank Edge)
Rigid Honeycomb 1″ cell kraft honeycomb
