Sargent 10X Series
Sargent 10XG24 LL Entrance or Office Cylindrical Lock
Finish: Satin Chrome (26D)
Faded finishes are special order with the cylinder option below.
Cylinder and keying
- Door to door shipping
- Technical support on every order: 346-777-3031
Overview
About this product
The Sargent 10XG24 LL is an entrance or office function cylindrical lock in the 10X Line. A push button in the inside lever locks the outside lever, and the inside lever always lets people out. This lock uses a deadlocking latch only; it has no deadbolt.
The 10X Line chassis fits doors 1-3/4" to 2" thick with a 2-3/4 inch backset and a 2.125 inch cross bore. The LL lever is solid cast zinc on a heavy wrought 3-1/2 inch rose, projecting 2-15/16 inches from the door face. It can be ordered with the conventional cylinder supplied, or with large format or small format interchangeable core prep (less core).
What the function does
Entrance or office (24). The deadlocking latch works from either lever unless the push button in the inside lever locks the outside lever. Turning the inside lever or using the key releases the button; closing the door does not. With the outside locked, the key retracts the latch and releases the button.
Highlights
- Entrance or office function, ANSI F82A
- Push button in the inside lever locks the outside lever
- Closing the door does not unlock the outside lever
- Deadlocking latch, no deadbolt
- Certified ANSI/BHMA A156.2 Series 4000 Grade 1, UL and cUL listed, with a 3 hour fire rating
- LL solid cast zinc lever with 3-1/2 inch rose
- 10 year limited warranty
How it works
Entrance/office function, ANSI F82A
A button on the inside locks the outside lever. A key unlocks it from outside. The inside lever is always free. Common on offices and entry doors.
Specifications
- Model
- 10XG24
- Function
- Entrance or Office, ANSI F82A
- Grade
- ANSI/BHMA Grade 1
- Series
- 10XG Line
- Lever
- Lever
- Trim
- LL
- Door thickness
- 1-3/4" (44mm) to 2" (51mm)
- Backset
- 2-3/4 Inch
- Cross bore
- 2.125 Inch
- Latch
- Deadlocking/Guarded
- Latch throw
- 1/2 Inch
- Latch face
- 2-1/4" x 1-1/8"
- Latch bolt material
- Stainless Steel
- Strike
- ANSI, 1-1/4 Inch x 4-7/8 Inch, 1-1/4 Inch Lip, Square Corner
- Fire rating
- 3 Hours
- UL listing
- ANSI A156.2 (2017), A156.41, Series 4000, Grade 1, UL Listed
- ADA compliant
- Yes
- Standards
- ANSI/BHMA A156.2 Series 4000, Grade 1; UL and cUL Listed; UL 10C Positive Pressure Requrements
- Lever material
- Solid cast zinc
- Rose diameter
- 3-1/2 Inch
- Trim material
- Solid Cast (Lever); Heavy Wrought (Rose)
- Projection
- 2-15/16 Inch
- Warranty
- 10 Year Limited
- Finish
- Satin Chrome (26D)
- SKU
- 10XG24 LL 26D
Documents
Send a photo of the door edge and the hardware on it. We'll match the part.
Send a photoCommon questions
Does the 10XG24 have a deadbolt?
No. It secures the door with a deadlocking latch. Locking is done with the push button in the inside lever.
Will the door unlock itself when it closes?
No. Once the outside lever is locked, it stays locked until the inside lever is turned or the key is used.
How does someone with a key get in when it is locked?
Turning the key in the outside lever retracts the latch and pops the inside push button, so the outside lever is unlocked again.
Is a less cylinder version offered?
Not for this item. It comes with a conventional cylinder, or with LFIC or SFIC prep less core.
Before you order
Buying for a whole job?
Send the hardware schedule or drawing. Door, frame and hardware quoted together so nothing shows up missing.