Sargent 10X Series
Sargent 10XG05 LP Office/Entry Cylindrical Lock
Finish: Bright Brass (605) (03)
Faded finishes are special order with the cylinder option below.
Cylinder and keying
- Door to door shipping
- Technical support on every order: 346-777-3031
Overview
About this product
Sargent's 10XG05 puts the office/entry function into a 10X Line cylindrical lock, shown here with the LP lever. It works well on private offices that are opened by key when locked. The lock carries an ANSI/BHMA Grade 1 rating.
The lever is solid cast zinc on a heavy wrought 3-1/2 inch rose, with a 2-15/16 inch projection. A stainless steel deadlocking latchbolt throws 1/2 inch, and the ANSI strike measures 1-1/4 inch by 4-7/8 inch. Available finishes include 26D, 10B and 26. It can be ordered with a conventional cylinder, prepped for a small format interchangeable core (SFIC), prepped for a large format interchangeable core (LFIC), or without a cylinder.
What the function does
Office or entry function with a deadlocking latch. Either lever retracts the latch unless the outside lever has been locked with the push/turn button in the inside lever. The push button is released by the outside key or by turning the inside lever; the turn button must be released by hand. When the outside lever is locked, the key retracts the latch.
Highlights
- 10X Line cylindrical lock, ANSI/BHMA Grade 1
- Office/entry function (ANSI F109)
- Solid cast zinc lever on a 3-1/2 inch wrought rose
- Stainless steel deadlocking latchbolt with 1/2 inch throw
- UL listed with a 3 hour fire rating
- 10 year limited warranty
Need a different finish, size or configuration? Request a quote and we'll get it for you.
How it works
Entrance/office function, ANSI F109
A button on the inside locks the outside lever. A key unlocks it from outside. The inside lever is always free. Common on offices and entry doors.
Specifications
- Model
- 10XG05
- Function
- Office/Entry, ANSI F109
- Grade
- ANSI/BHMA Grade 1
- Series
- 10XG Line
- Lever
- Lever
- Trim
- LP
- Door thickness
- 1-3/4" (44mm) to 2" (51mm)
- Backset
- 2-3/4 Inch
- Cross bore
- 2.125 Inch
- Latch
- Deadlocking/Guarded
- Latch throw
- 1/2 Inch
- Latch face
- 2-1/4" x 1-1/8"
- Latch bolt material
- Stainless Steel
- Strike
- ANSI, 1-1/4 Inch x 4-7/8 Inch, 1-1/4 Inch Lip, Square Corner
- Fire rating
- 3 Hours
- UL listing
- ANSI A156.2 (2017), A156.41, Series 4000, Grade 1, UL Listed
- ADA compliant
- Yes
- Standards
- ANSI/BHMA A156.2 Series 4000, Grade 1; UL and cUL Listed; UL 10C Positive Pressure Requrements
- Lever material
- Solid cast zinc
- Rose diameter
- 3-1/2 Inch
- Trim material
- Solid Cast (Lever); Heavy Wrought (Rose)
- Projection
- 2-15/16 Inch
- Warranty
- 10 Year Limited
- Finish
- Bright Brass (605) (03)
- SKU
- 10XG05 LP 03
Documents
Send a photo of the door edge and the hardware on it. We'll match the part.
Send a photoCommon questions
How is the outside lever locked?
With the push/turn button in the inside lever.
What is the difference between push and turn on the button?
A pushed button is released by the outside key or by turning the inside lever. A turned button stays set until someone releases it by hand.
What door prep does it need?
A 2.125 inch cross bore with a 2-3/4 inch backset, on doors from 1-3/4 inch to 2 inch thick.
What cylinder options are offered?
It can be ordered with a conventional cylinder, prepped for a small format interchangeable core (SFIC), prepped for a large format interchangeable core (LFIC), or without a cylinder.
What is the LP trim?
LP is the lever design used on this version. The lever is solid cast zinc with a 2-15/16 inch projection.
Before you order
Buying for a whole job?
Send the hardware schedule or drawing. Door, frame and hardware quoted together so nothing shows up missing.