Hager 3882E Withnell Institution Mortise Lock, Escutcheon Trim in Satin Chrome (26D)

Hager 3800 Series

Hager 3882E Withnell Institution Mortise Lock, Escutcheon Trim

ANSI F30 3882 institutionGrade 12-3/4" backset
$543.99 each
SKU 3882E 26D WTN FULL

Finish: Satin Chrome (26D)

Faded finishes are special order with the cylinder option below.

Cylinder and keying

Keyed and ready to install
Less cylinder, for your key system
Only 7 left in stock Need more? Add the rest to a quote and we confirm lead time.
Add to a project quote
  • Door to door shipping
  • Technical support on every order: 346-777-3031
Hager 3882E Withnell Institution Mortise Lock, Escutcheon Trim Satin Chrome (26D) (26D), Conventional cylinder (Schlage C keyway) $543.99

Overview

About this product

The Hager 3882E is an institution (F30) mortise lock from the 3800 Series, built to ANSI A156.13 Grade 1, Series 1000 Operational and Security. It pairs Withnell levers with escutcheon trim, a full plate that covers the area around the lever. It suits institutional doors where both sides must be controlled by key.

It has a 2-3/4" backset and comes in 10B, 26D, 32D and BLK finishes. The escutcheon takes the cylinder through the plate, and you can order it with a conventional cylinder in the Schlage C keyway, an SFIC 7-pin or LFIC 6-pin prep less core, or less cylinder.

What the function does

Institution function. A key from either side retracts the latchbolt. The levers on both sides are always inoperative. The auxiliary latch deadlocks the latchbolt when the door is closed.

Highlights

  • Levers on both sides always inoperative
  • Key from either side retracts the latchbolt
  • Auxiliary latch deadlocks the latchbolt
  • Escutcheon trim with Withnell lever
  • ANSI A156.13 Grade 1, Series 1000
  • 2-3/4" backset; finishes 10B, 26D, 32D and BLK

Photo shows the Satin Chrome (26D) and Satin Stainless Steel (32D) finish. Other finishes are the same product in the finish you select.

Specifications

Model
3882E
Function
3882 Institution, ANSI F30
Grade
Grade 1
Series
3800 Grade 1 mortise
Lever
WTN Withnell
Trim
E - Escutcheon
Backset
2-3/4"
Standards
ANSI A156.13 Grade 1 Series 1000 Operational and Security
Finish
Satin Chrome (26D)
SKU
3882E 26D WTN FULL
Not sure it fits your door?

Send a photo of the door edge and the hardware on it. We'll match the part.

Send a photo

Common questions

Can someone inside open the door without a key?

No. Both levers are always inoperative, so a key is needed from either side. Confirm this suits your code requirements before ordering.

Where is this function typically used?

On doors where staff must control passage in both directions, such as secure institutional rooms.

What does escutcheon trim mean?

The lever mounts on a full plate rather than a small round rose. The plate covers more of the door face around the lever and cylinder.

Which cylinder options are there?

Conventional cylinder in the Schlage C keyway, SFIC 7-pin prep less core, LFIC 6-pin prep less core, or less cylinder.

What backset does it use?

It uses a 2-3/4" backset.

Before you order

Lock functions Passage, privacy, storeroom, classroom Which function each room needs, and what the ANSI numbers mean.
Keying IC cores and keyways explained Conventional, FSIC and SFIC, and when to order less cylinder.
Finishes US finish codes decoded US26D, US32D, US10B and the rest, matched to BHMA numbers.
Handing How to determine door handing LH, RH, LHR, RHR, worked out from where you stand.

Buying for a whole job?

Send the hardware schedule or drawing. Door, frame and hardware quoted together so nothing shows up missing.