Hager 3500 Series
Hager 3510 August Passage Cylindrical Lever Lock
Finish: Satin Chrome (26D)
Faded finishes are special order.
- Door to door shipping
- Technical support on every order: 346-777-3031
Overview
About this product
Hager's 3510 passage lock pairs the August lever with the 3500 Series cylindrical chassis, rated ANSI/BHMA Grade 2. It is a common choice for corridor doors, pantries and interior rooms where nobody needs to lock up.
It installs in a standard 2.125 inch cross bore at a 2-3/4" backset. The 1/2 inch spring latch has a stainless steel bolt and a 1-1/8" x 2-1/4" face. Lever projection is 2-23/32 inch.
It comes in 26D, US26, US3, US4, US10B and BLK finishes, so it can match the rest of the hardware on a job.
What the function does
ANSI F75 passage. Both levers stay free at all times; there is no button and no cylinder. A turn of either lever pulls the latch back.
Highlights
- ANSI/BHMA Grade 2 cylindrical lock, F75 passage function
- August lever on a 3-11/32 inch round rose
- 1/2 inch throw stainless steel spring latch
- Fits a 2.125 inch cross bore, 2-3/4" backset
- UL10C and UL10B listed, 3-hour fire rating
- Lifetime warranty
How it works
Passage function, ANSI F75
Both levers are always free and there is no lock. The door only latches shut. Common on halls, closets and other rooms that never lock.
Specifications
- Model
- 3510
- Function
- Passage, ANSI F75
- Grade
- ANSI/BHMA Grade 2
- Series
- 3500 (Grade 2 cylindrical)
- Lever
- AUG August
- Trim
- Round Rose
- Backset
- 2-3/4"
- Cross bore
- 2.125 Inch
- Latch
- Spring
- Latch throw
- 1/2 Inch
- Latch face
- 1-1/8" x 2-1/4"
- Latch bolt material
- Stainless Steel
- Strike
- ASA
- Fire rating
- 3 Hours
- UL listing
- UL10C, UL10B
- ADA compliant
- Yes
- Standards
- ANSI/BHMA A156.2; UL/cUL Listed; ANSI A250.13 Severe Windstorm Component; Miami-Dade County Florida NOA# 17-1226.23; UL10C; UL10B
- Rose diameter
- 3-11/32 Inch
- Trim material
- Cast Zinc (Lever)
- Projection
- 2-23/32 Inch
- Warranty
- Lifetime
- Finish
- Satin Chrome (26D)
- SKU
- 3510 26D AUG
Documents
Send a photo of the door edge and the hardware on it. We'll match the part.
Send a photoCommon questions
What door prep does this lock need?
A 2.125 inch cross bore and a 2-3/4" backset. The latch face is 1-1/8" x 2-1/4" and it uses an ASA strike.
Can this lock be locked?
No. It has no cylinder or button. If the door needs to lock, look at the privacy, office, entry, classroom or storeroom versions in the same series.
What standards is it listed to?
It is tested to ANSI/BHMA A156.2 at Grade 2 and is UL10C and UL10B listed.
Before you order
Buying for a whole job?
Send the hardware schedule or drawing. Door, frame and hardware quoted together so nothing shows up missing.