Falcon W Series
Falcon W571 Dane Corridor Grade 2 Cylindrical Lock
Finish: Satin Chrome (626)
Faded finishes are special order with the configuration option below.
Configuration
- Door to door shipping
- Technical support on every order: 346-777-3031
Overview
About this product
The Falcon W571 Dane is a Grade 2 cylindrical lever lock in the corridor function (ANSI F90), part of Falcon's W Series. It is a practical choice for corridor doors and offices that should not stay locked after someone walks out. Closing the door releases the inside button, so the lock does not stay locked once the door shuts.
It fits a 2-3/4-inch backset with a 2.125-inch cross bore, and the stainless steel latch has a 1/2-inch throw. It carries a 3 hour fire rating with a UL A Label listing and meets ADA requirements. Finishes offered: 613, 619, 622, 625, 626, 643E.
What the function does
A push button on the inside locks the outside lever, and it stays locked until a key is used outside or the inside lever is rotated. Closing the door releases the button, so the lock unlocks when the door shuts. The latch is deadlocking, and the inside is always free for immediate exit.
Highlights
- Corridor function, ANSI F90
- Grade 2 cylindrical lock to ANSI A156.2
- Inside always free for immediate egress
- 3 hour fire rating, UL A Label listed
- Meets ADA requirements
- Deadlocking latch bolt
- Conventional Schlage C cylinder
Specifications
- Model
- W571
- Function
- Corridor, ANSI F90
- Grade
- 2
- Series
- W Series
- Lever
- D Dane
- Backset
- 2-3/4 Inch
- Cross bore
- 2.125 Inch
- Latch throw
- 1/2 Inch
- Latch bolt material
- Stainless Steel
- Strike
- ANSI, 1-1/4 Inch x 4-7/8 Inch, 1-1/4 Inch Lip, Square Corner
- Fire rating
- 3 Hours
- UL listing
- A Label
- ADA compliant
- Yes
- Standards
- ANSI/BHMA A156.2; UL Listed
- Warranty
- 10 Year Limited
- Buy American Act
- Yes
- Finish
- Satin Chrome (626)
- SKU
- W571CP6D D 626
Documents
Send a photo of the door edge and the hardware on it. We'll match the part.
Send a photoCommon questions
Does the lock stay locked after the door closes?
No. Closing the door releases the push button, so the outside lever unlocks when the door shuts. If the door has to stay locked, a storeroom function is a better fit.
Can I get out of the room without a key?
Yes. The inside is always free, so turning the inside lever opens the door at any time.
Will it fit my existing door prep?
It is built for a 2-3/4-inch backset and a 2.125-inch cross bore, and uses an ANSI strike. Check your door's prep against those sizes before installing.
Is it rated for fire doors?
Yes. It carries a 3 hour fire rating and a UL A Label listing.
What cylinder does it use?
It is offered with a conventional Schlage C cylinder.
Before you order
Buying for a whole job?
Send the hardware schedule or drawing. Door, frame and hardware quoted together so nothing shows up missing.