Falcon W Series
Falcon W511 Latitude Entry/Office Grade 2 Cylindrical Lock
Finish: Satin Nickel (619)
Faded finishes are special order with the cylinder option below.
Cylinder and keying
- Door to door shipping
- Technical support on every order: 346-777-3031
Overview
About this product
Falcon's W511 with the Latitude lever is a Grade 2 cylindrical lock built around the entry/office function (ANSI F109). It works well on private offices, break rooms and reception doors. An inside button lets occupants lock the outside lever, and a key opens it from the corridor.
It fits a 2-3/4-inch backset with a 2.125-inch cross bore, and the stainless steel latch has a 1/2-inch throw. It carries a 3 hour fire rating with a UL A Label listing and meets ADA requirements. Finishes offered: 613, 619, 622, 625, 626, 643E.
What the function does
Pressing the inside button locks the outside lever. Push and turn the button and the outside lever stays locked, needing a key, until someone turns the button back by hand. Push it without turning and the outside lever stays locked until a key is used or the inside lever is rotated. From outside, the key only unlocks. Levers retract a deadlocking latch, and the inside is always free for immediate exit.
Highlights
- Entry/office function, ANSI F109
- Grade 2 cylindrical lock to ANSI A156.2
- Inside always free for immediate egress
- 3 hour fire rating, UL A Label listed
- Meets ADA requirements
- Deadlocking latch bolt retracted by either lever
- Schlage C conventional cylinder or SFIC prep, less core
Photo shows the product design. It ships in the finish you select.
How it works
Entrance/office function, ANSI F109
A button on the inside locks the outside lever. A key unlocks it from outside. The inside lever is always free. Common on offices and entry doors.
Specifications
- Model
- W511
- Function
- Entry/office, ANSI F109
- Grade
- 2
- Series
- W Series
- Lever
- LAT Latitude
- Backset
- 2-3/4 Inch
- Cross bore
- 2.125 Inch
- Latch
- Deadlatch
- Latch throw
- 1/2 Inch
- Latch face
- 1-1/8" x 2-1/4"
- Latch bolt material
- Stainless Steel
- Strike
- ANSI, 1-1/4 Inch x 4-7/8 Inch, 1-1/4 Inch Lip, Square Corner
- Fire rating
- 3 Hours
- UL listing
- A Label
- ADA compliant
- Yes
- Standards
- ANSI/BHMA A156.2; UL Listed
- Warranty
- 10 Year Limited
- Buy American Act
- Yes
- Finish
- Satin Nickel (619)
- SKU
- W511CP6D LAT 619
Documents
Send a photo of the door edge and the hardware on it. We'll match the part.
Send a photoCommon questions
Can someone lock themselves out with this lock?
If the button is pushed and turned, the outside lever stays locked until the button is turned back from inside, so a key is needed to get back in. Pushing the button without turning it is easier to clear: rotating the inside lever releases it.
Can I get out of the room without a key?
Yes. The inside is always free, so turning the inside lever opens the door at any time.
Will it fit my existing door prep?
It is built for a 2-3/4-inch backset and a 2.125-inch cross bore, and uses an ANSI strike. Check your door's prep against those sizes before installing.
Is it rated for fire doors?
Yes. It carries a 3 hour fire rating and a UL A Label listing.
What cylinder options are there?
It comes with a conventional Schlage C cylinder, or prepped for a small format interchangeable core (SFIC) with the core left out so you can match an existing keying system.
Before you order
Buying for a whole job?
Send the hardware schedule or drawing. Door, frame and hardware quoted together so nothing shows up missing.