Falcon MA Series
Falcon MA521 Dane-Napa Entry/Office Mortise Lock
Finish: Bright Brass (605)
Faded finishes are special order with the cylinder option below.
Cylinder and keying
- Door to door shipping
- Technical support on every order: 346-777-3031
Overview
About this product
Falcon's MA521 Dane-Napa is a mortise lock from the MA Series built around the entry/office function with button lockout (ANSI F04). Typical openings include office doors and interior entries that need to be locked now and then. The lock body installs in a mortise pocket in the door edge, with the trim mounted on each face.
It is rated Grade 1 under ANSI/BHMA 156.13, UL listed with a fire rating of 3 hours, and ADA compliant. It fits doors 1-3/4 in. to 1-7/8 in. thick with a 2-3/4 in. backset and a 3/4 in. latch throw. Finishes offered: 605, 606, 622, 625, 626, 630, 643E. Cylinder choices: 6-pin conventional cylinder (Schlage C); LFIC prep, less core; SFIC prep, less core.
What the function does
With the buttons in the lock face set to unlocked, the lever on either side retracts the latch bolt. When the buttons lock the outside lever, the outside retracts the latch bolt only by key, while the inside lever still retracts it. An auxiliary dead latch is included.
Highlights
- Buttons in the lock face lock or unlock the outside lever
- Key retracts the latch bolt from outside when the outside lever is locked
- Inside lever retracts the latch bolt whether or not the outside is locked
- Auxiliary dead latch
- Grade 1, ANSI/BHMA 156.13
- UL listed, 3 hours fire rating
- Fits 1-3/4 in. to 1-7/8 in. doors, 2-3/4 in. backset
Photo shows the Bright Brass (605) and Satin Brass (606) and Bright Chrome (625) and Satin Chrome (626) and Satin Stainless Steel (630) finish. Other finishes are the same product in the finish you select.
How it works
Entrance/office function, ANSI F04
A button on the inside locks the outside lever. A key unlocks it from outside. The inside lever is always free. Common on offices and entry doors.
Specifications
- Model
- MA521
- Function
- Entry/Office, ANSI F04
- Grade
- ANSI/BHMA Grade 1
- Series
- MA Series
- Lever
- Dane
- Trim
- DN Dane-Napa
- Door thickness
- 1-3/4" to 1-7/8"
- Backset
- 2-3/4 Inch
- Latch
- Two Piece Anti-Friction Type
- Latch throw
- 3/4 Inch
- Latch face
- 1-1/4" x 8"
- Fire rating
- 3 Hours
- UL listing
- UL Listed
- ADA compliant
- Yes
- Standards
- Grade 1 - ANSI/BHMA 156.13; UL Listed 3-hour Fire Door; ANSI AII5.1
- Projection
- 2-1/2 Inch
- Finish
- Bright Brass (605)
- SKU
- MA521CP6 DN 605
Send a photo of the door edge and the hardware on it. We'll match the part.
Send a photoCommon questions
How do I lock the outside lever?
Set the buttons in the face of the lock, on the edge of the door. Once they are set, the outside lever is inoperative and entry from outside is by key.
Can someone inside get out when the outside is locked?
Yes. Operating the inside lever retracts the latch bolt even when the outside lever is locked.
Does this lock have a dead bolt?
No. This function uses a latch bolt with an auxiliary dead latch. Choose an entry/office function with a dead bolt if the door needs one.
Can it be used on a fire-rated door?
Yes. This lock is UL listed, with a fire rating of 3 hours. Check the door and frame labels as well.
What cylinder options are available?
This lock is offered as 6-pin conventional cylinder (Schlage C); LFIC prep, less core; SFIC prep, less core. Choose based on whether your building uses conventional keying or an interchangeable core system.
Before you order
Buying for a whole job?
Send the hardware schedule or drawing. Door, frame and hardware quoted together so nothing shows up missing.