Continuous Hinges

Geared aluminum or pin and barrel

Geared continuous hinges use interlocking aluminum leaves and a full-length bearing cap. They suit high-traffic storefronts, schools and retrofits on worn frames. Stainless pin and barrel hinges, such as the Ives 700 and 705, run a continuous pin through the full length and suit wet or corrosive locations. Our continuous hinges vs butt hinges guide compares them with butt hinges.

Choosing the model

• Mounting: full mortise models fit in the gap between the door and frame. Full surface models wrap the face of both the door and the frame and are often used on retrofits.
• Duty: HD and XHD models are for heavier doors and higher traffic than the standard versions.
• Length: continuous hinges are a little shorter than the door. 83" is common on 7-foot doors and 95" on 8-foot doors.
• Finish: clear anodized and dark bronze anodized aluminum are the usual choices to match storefront framing.

Electrified openings

For electric locks, choose a version with electric power transfer prep, such as the Ives 224HD EPT, or use an electrified hinge on butt-hinged doors. Not sure which model fits your frame? Call 346-777-3031.