The Tell 600 Series door closer is a grade 1, heavy duty cast aluminum surface applied door closer, designed for interior commercial use and comes with hardware for all installation applications. This closer complies with ANSI A156.4, UL/ULC listed up to three hours fire rated. The closer is an adjustable 1-4 and 3-6 adjustable spring tension. Other finishes available. Specifications Specification Details Performance Complies with ANSI A156.4 Grade 1, 2,000,000 cycles UL/ULC listed up to 3 hours fire rated Chassis Cast aluminum Handing Non-handed Mounting Tri-Pack – regular, top jamb and parallel arm applications Arm Forged steel, accommodates reveals up to 3 1/4”, adjustable extension arm Spring Power Adjustable sizes 1 - 4 or 3 - 6 Warranty Lifetime limited Options Option Details Arm Options Top Jamb Deep Reveal – DC100101 AL, DC100134 DURO Friction Hold Open – DC100097 AL, DC100098 DURO Cover Kit Plated kits: DC100165 US3, DC100167 US26 Cover Parallel arm Bracket forged steel Drop Plate DC100100 (AL), DC100129 (Duro) For top jamb mount when overhead ceiling clearance is less than 1-7/8” Provides clearance for overhead holder Permits parallel arm installation on doors with a minimum top rail of 2-1/2” Thru-bolts SNB1 – DC100222 AL, DC100095 DURO (For 1-3/4” door) SNB2 – DC100089 (AL), DC100203 (Duro) (For 1-3/8” door)

Read more less

Premium adjustable door closer with multiple finishes.

Read more less

Premium grade adjustable door closer with multiple finishes.

Read more less

The 900 Series Door Closer is a grade 1, maximum duty cast steel surface applied door closer. Ideal for new applications where durability is required. Tell’s 900 Series features a rugged construction with adjustable backcheck, independent sweep and latch closing speed, and is a 1 - 6 adjustable size.   Category Details Performance Complies with ANSI A156.4 Grade 1, 2,000,000 million cycles UL/ULC listed up to 3 hours fire rated Chassis Closer cast steel Handing Non-handed Mounting Regular arm applications Top jamb applications Parallel arm applications Arm Forged steel Accommodates reveals up to 3-1/4” Adjustable extension arm Track Arm Spring Power Adjustable sizes 1 – 6 Backcheck Adjustable, hydraulic - providing cushioning and preventing uncontrolled openings of the door Valves Adjustable, independent, non-critical (sweep and latch), consistent closing speeds Fasteners Metal screws included for hollow metal and aluminum mounting applications Wood screws included for wood door mounting applications Thru-bolts are included Cover High impact plastic Plated kit: cover, arm & bracket Door Range Up to 180 degrees Door Preparation 5” horizontal x 2-1/4” vertical 4-Hole mounting locations Retrofits traditional closer Warranty Lifetime limited

Read more less

Full mortise spring hinge. Complies with ANSI A156.1, 1999. Square corner, .134 gauge steel.

Read more less

Grade 1 mortise lock with the following features: Heavy duty construction with advanced security features

Read more less

Electronic access lock with: - Electronic Access - F-SO and F-RC Strike - 5-pin SCC SMT Keyway - Adjustable Latch

Read more less

Grade 2 cylindrical lock with the following features: - 3 1/4" Rose - 1 3/8" to 2" Door - ASA Strike - Schlage C Keyway - 2 3/4" Latch - IC Available

Read more less

Grade 2 cylindrical lock with the following features: - 3 1/2" Rose - Freewheeling Clutch - 1 3/8" to 2" Door - ASA Strike - Schlage C Keyway - 2 3/4" Latch

Read more less

Grade 1 cylindrical lock with the following features: - ANSI A156.2 Series 4000 Grade 1 - 800,000 cycle tested - UL listed for 3-hour fire door - ADA compliant

Read more less

Grade 2 cylindrical lock with the following features: - 3" Rose - ASA Strike - Schlage C Keyway - 2 3/4" Latch

Read more less